Eu Declaration Of Conformity; Uk Declaration Of Conformity; Description; Technical Data - SKF TMJL 50 Bedienungsanleitung

EU Declaration of Conformity

TMJL 50
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare under our sole
responsibility that the products described in these
instructions for use, are in accordance with the
conditions of the following Directive(s):
MACHINERY DIRECTIVE 2006/42/EC
and are in conformity with the following standards:
EN–ISO 12100, EN–ISO 14121–1, EN–ISO 4413
Houten, The Netherlands, November 2021
Mrs. Andrea Gondová
Manager Quality and Compliance

1. Description

The TMJL 50 has a maximum pressure of 50 MPa
(7 250 psi) and delivers a volume per stroke of
(0.21 in ).
3,5 cm
3 3
It is mainly intended for use on the low pressure
side of OK-couplings but is also suitable for other oil
injection applications where a maximum pressure
of 50 MPa (7 250 psi) is required. The pump is
supplied with a 3 metre long, high pressure hose
with quick connection coupling. Mating quick

2. Technical data

Maximum pressure
Volume per stroke
Oil container capacity
Handle force at 50 MPa
Pressure hose
Connection nipple
Oil viscosity of mounting fluid
Weight (filled with oil)
Designation
4
EN

UK Declaration of Conformity

TMJL 50
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare under our sole
responsibility that the products described in these
instructions for use, are in accordance with the
conditions of the following Directive(s):
Supply of Machinery (Safety) Regulations 2008
(2008 No. 1597) and are in conformity with the
following standards:
EN–ISO 12100, EN–ISO 14121–1, EN–ISO 4413
The person authorised to compile the technical
documentation on behalf of the manufacturer is
SKF (U.K.) Limited, 2 Canada Close, Banbury,
Oxfordshire, OX16 2RT, GBR.
Houten, The Netherlands, November 2021
Mrs. Andrea Gondová
Manager Quality and Compliance
connection nipple for attachment to the workpiece
is included.
The pump is filled with SKF mounting fluid
LHMF 300 and comes with an additional
1 litre can with the same fluid. Everything is packed
in a sturdy case.
The pump has an over-pressure valve and a
connection port for pressure gauge.
The release valve is an integrated part of the
pump head.
50 MPa (7 250 psi)
(0,21 in )
3,5 cm
3 3
(165 in )
2 700 cm 3
3
310 N (70 lbf)
3 m (10 ft) long with quick connection coupling
G / , external or internal thread
1
4
/s (1 400 SUS) at 20 °C
300 mm
2
12 kg (26 lb)
TMJL 50