Storage; Note Regarding Disposal / Options To Reuse; Decommissioning - Optimum OPTisaw S 350DG Betriebsanleitung

7.5

Storage

ATTENTION!
Improper storage may cause important parts to be damaged or destroyed.
Store packed or unpacked parts only under the following ambient conditions.
Please follow the instructions and indications on the transportation box.

Fragile goods (goods require careful handling)

Protect against humidity and humid environments

Environmental conditions on page 77.

Prescribed position of the packaging box (marking the
top side – arrows pointing upward)

Maximum stacking height
Example: non-stackable – do not pile any further
packaging boxes on top of the first packaging box
Consult Optimum Maschinen Germany GmbH if the metal belt saw and accessories have to be
stored for a period of over three months or under different external conditions than those given

here Information on page 65.
7.6

Note regarding disposal / options to reuse

Please dispose of your device environmentally friendly by disposing of scrap in a professional
way.
Please neither throw away the packaging nor the used machine later on, but dispose of them
according to the guidelines established by your city council/municipality or by the corresponding
waste management enterprise.
7.6.1

Decommissioning

CAUTION
Used devices need to be decommissioned in a professional way in order to avoid later
misuses and endangerment of the environment or persons

Pull off the mains plug.

Disconnect the connection cable.

Remove all environmentally hazardous operating fluids from the used device.

If applicable remove batteries and accumulators.

Disassemble the machine if required into easy-to-handle and reusable
assemblies and component parts.
EN S350DG
114 Translation of original operating manual
Appendix
Version 1.1.2 - 2021-11-03