How To Clean The Device - Geberit AquaClean 147041SI1 Bedienungsanleitung

EN
The wall-mounted control panel is without function
The following table will help you with troubleshooting if:
• the wall-mounted control panel is not functioning.
• the shower toilet cannot be controlled with the wall-mounted control panel.
In the event of malfunctions, follow the instructions in the shower toilet user manual.
Description of problem
LED display flashed red.
Touch-sensitive surface
does not respond when
touched.
LED display flashes red
twice, followed by a short
break.

How to clean the device

Caring for and cleaning
smooth surfaces
All smooth surfaces can be cleaned hygien-
ically with water and a mild, liquid cleaning
agent that is kind to the skin.
18
Cause
Batteries flat
Malfunction has
occurred
Pairing unsuccessful
User interface
inactive
Fault clearance
▶ Replace the batteries.
→ See "Replace the battery",
page 17.
▶ Check batteries in the wall-mounted
control panel.
▶ Check mains connection to the
shower toilet.
▶ Re-assign wall-mounted control
panel.
→ See "Assign wall-mounted control
panel", page 14.
▶ Re-assign wall-mounted control
panel.
→ See "Assign wall-mounted control
panel", page 14.
Aggressive and scouring cleaning
agents can damage the surface. Only
use mild, liquid cleaning agents that
are kind to the skin. The Geberit
AquaClean cleaning set (art. no.
242.547.00.1) includes a ready-made
cleaning agent that is optimal for
cleaning all Geberit AquaClean
surfaces.
36028801569624075 © 07-2022
968.101.00.0(01)