Spare Parts And Optional Accessories; Hydraulic Oil - SKF THHP 300 Bedienungsanleitung

2.5 Spare parts and optional accessories

Spare parts
High pressure hose, 300 MPa (43 500 psi), M16x1.5 cone male,
G1/4 female, 2 m (6.5 ft.)
Pressure gauge (0-300 MPa / 43 500 psi)
Pressure gauge protection sleeve
Nipple M16x1.5 cone male, G1/4 male, 400 MPa (58 000 psi)
Nipple M16x1.5 cone male, G3/4 male, 400 MPa (58 000 psi)
Quick connection coupling, M16x1.5 cone female, 300 MPa (43 500 psi)
Quick connection nipple, M16x1.5 cone female, 300 MPa (43 500 psi)
Mounting fluid (1 litre)
Tool case (empty) for THHP 300
Repair kit for THHP 300 pump
Optional accessories
Nipple M16x1.5 cone male, G1/8 male, 300 MPa (43 500 psi)
Nipple M16x1.5 cone male, G3/8 male, 400 MPa (58 000 psi)
Nipple M16x1.5 cone male, G1/2 male, 400 MPa (58 000 psi)
Mounting fluid (5 litre)
Dismounting fluid (5 litre)
High pressure hose, 300 MPa (43 500 psi),
M16x1.5 cone male, G1/4 female, 3 m (9.8 ft.)
High pressure hose, 300 MPa (43 500 psi),
M16x1.5 cone male, G1/4 female, 4 m (13.1 ft.)

2.6 Hydraulic oil

The pump is filled with SKF Mounting Fluid
LHMF 300.
Dirt and metal particles in the oil can cause wear of
the piston mating surfaces, leading to excessive oil
leakage and permanent damage to the THHP 300.
The recommended oil cleanliness level should meet
or exceed ISO 4406:1999 20/18/15.
Using fluids or oils, other than SKF mounting and
dismounting fluids, can cause corrosion and/or
damage to mating surfaces.
Job type
Mounting
Dismounting
6
EN
Environment temperatures
0 °C (32 °F) to 35 °C (95 °F)
35 °C (95 °F) to 45 °C (113 °F)
0 °C (32 °F) to 10 °C (50 °F)
10 °C (50 °F) to 45 °C (113 °F)
Do not mix fluids or oils of different brands.
Use appropriate oil with a viscosity of 300 cSt, at
operating temperature, to mount bearings and
similar items using the SKF Oil Injection Method.
SKF hydraulic fluids used in our pumps are
especially formulated for the mounting and
dismounting processes. In the table below is an
overview of what to use when:
SKF Oil
SKF Mounting Fluid, LHMF 300
SKF Dismounting Fluid, LHDF 900
SKF Mounting Fluid, LHMF 300
SKF Dismounting Fluid, LHDF 900
Designation
THHP 300-2H
1077589
TMJG 100S
THPN M16G1/4
THPN M16G3/4
THPC 300-1
THPN 300-1
LHMF 300/1
THHP 300-9
THHP 300-3
Designation
THPN M16G1/8
THPN M16G3/8
THPN M16G1/2
LHMF 300/5
LHDF 900/5
THHP 300-2H/3
THHP 300-2H/4