Setting Up And Connecting The Device; Handling And Operation; Filling The Water Tank - Beem 05192 Bedienungsanleitung

23

Setting Up and Connecting the Device

PLEASE NOTE!
• Only connect the device to a plug socket that is properly installed. The plug socket
must also be readily accessible after connection so that the connection to the mains can
quickly be isolated. The mains voltage must match the technical data of the device.
• Lay the connecting cable in such a way that it does not become squashed or bent and does
not come into contact with hot surfaces (also applies to the hot surfaces of the device!).
• Do not use the device in conjunction with extension cables.
• Do not place the device below kitchen wall units or similar cupboards. The rising
steam could cause damage to them!
1. Fully unwind the connecting cable.
2. Place the device on the kitchen unit or another dry, solid, fl at, heat-resistant and splash-
proof work surface. Ensure there is suffi cient clear space on all sides (at least 20 cm to the
sides and 30 cm above).
3. Insert the mains plug into a properly installed plug socket that is easily accessible.

Handling and Operation

Time
As soon as the mains plug is plugged into a plug socket, the display lighting turns on and the
time display 12:00 fl ashes. The clock has a 24-hour time format.
1. Set the hours by pressing the H button (24).
2. Set the minutes by pressing the M button (22).
The time is saved until a new time is set or the device has been disconnected from the
power supply.

Filling the Water Tank

1. Open the water tank lid (9).
2. Pour the quantity of water required for the number of cups you want (maximum 10 cups)
into the water tank (11). Only ever use water to make coffee; do not pour milk or
other liquids into the water tank!
3. Close the water tank lid.
All of the water in the water tank is always used, regardless of the set number of cups or
coffee strength.
EN