Disposal Of Electrical Components (Where Present) - Palazzetti Ecomonoblocco MX 25:9F Installations- Und Wartungsanleitungen

The demolition and disposal of the ap-
pliance is the sole responsibility of the
owner, who must comply with the cur-
rent regulations in the country where
the appliance is in use for the dispos-
al of materials and, if required, for a
declaration of disposal, with regard to
safety, respect and protection of the
environment.
Disposal can be entrusted to a third party, provid-
ed only companies authorised for the recovery
and elimination of the materials in question are
used.
All dismantling for demolition must
be carried out with the appliance sta-
tionary and with the power supply cut,
where present.
Leaving the appliance in accessible
areas is a serious danger to people and
animals.
The differentiated disposal of the product makes
it possible to avoid potentially negative conse-
quences on the environment and health, and
also allows recycling of the materials making up
the product in order to achieve significant energy
and resource savings.
Any liability for damage to people and animals
always falls on the owner. Upon demolition, the
CE marking, this manual and other documents
relating to this appliance must be destroyed.
11.1 Disposal of electrical components
(where present)
• Remove all the electrical equipment.
• Separate the accumulators on the electronics
boards.
• Scrap the structure of the appliance with the
assistance of authorised companies.
INFORMATION FOR THE PROPER DISPOSAL OF
THE BATTERIES WITHIN THE MEANING OF THE
EU DIRECTIVE 2006/66/EC
Please replace the battery when its electric charge
is exhausted: at the end of its useful life this bat-
tery must not be disposed of together with un-
sorted waste. It must be delivered at appropriate
selective collection centres for municipal waste
or to resellers who provide this service. Disposing
of a battery separately allows you to avoid possi-
ble adverse effects on the environment and on
human health resulting from improper disposal
and allows to recover and recycle the materials of
62
which it is composed, with substantial savings on
energy and resources. In order to emphasize on
the obligation to dispose of separately the batter-
ies, on the battery itself there is the crossed-out
wheeled bin symbol. Abusive disposal of the
product by the user involves the application of
administrative sanctions provided by law.
A crossed-out wheelie bin symbol on
the equipment label indicates that the
product must not be disposed of as
unsorted waste, but should be sent to
separate collection facilities for recov-
ery and recycling.
Pursuant to art.13 of Italian Legislative Decree
no. 151 of 25 July 2005 implementing the Direc-
tive 2002/96/EC of 23 February 2003 on Waste
Electrical and Electronic Equipment relating
to the measures and procedures designed to
prevent the production of waste electrical and
electronic equipment, called WEEE, promoting
the reuse, recycling and other forms of recovery
so as to reduce the quantity to be disposed of
and improving the intervention of the parties
involved in the life cycle of such products.
004778930 - 06/12/2021