Commissioning; Description And Positioning Of The Deflectors; Deflector Assembly - Palazzetti Ecomonoblocco MX 25:9F Installations- Und Wartungsanleitungen

8

commISSIonInG

After positioning the appliance it is necessary to
perform the following operations:
8.1 Description and positioning of
the deflectors
No. Description
1 Upper panel.
2 Bottom panel
Dimensions in mm.

8.2 Deflector assembly

For the numbering of the panels refer
to the section "Description and position-
ing of the deflectors" on page 53.
1) Open the door by pushing it upwards.
2) Position the panels ((1) resting them on the
appropriate supports (A) (Fig. 18).
1
3) Position the panels (2) resting them on the
appropriate supports (b) (Fig. 19).
004778930 - 06/12/2021
ITALIANO ENGLISH
Quantity /
Dimension
3 / 285x330
3 / 285x375
A
Fig. 18
DEUTSCH FRANÇAIS
2
Place the panels
ports, spacing them
both sides of the boiler (Fig. 20).
Do not leave any clearance between
the panels in order to ensure proper
smoke evacuation flow.
=
=
ESPAÑOL
B
Fig. 19
on the sup-
equally on
1 2
=
=
Fig. 20
53