Navigation; Up And Down Keys; And "-" Keys - Siemens PA0820M Gebrauchsanweisung

The control panel is designed to make it
easier to use your appliance. The following
points need to be taken into consideration.
The "up" and "down" keys are used to move
up and down the screen. The "+" and "–" keys
(right and left) are used to move to the right
and to the left in the selection box. The box
shows the function selected for modification.
The following is an example of navigation:

Up and down keys

The "up" and "down" keys are used to move
up and down the screen.
"Down" key :
Starting from the screen shown in the first
figure (the selection box is situated on the
operation function option). If you press key
the selection box moves down to the
"Temperature selection" function.
If you press key
moves down to the "speed selection" function.
again, the selection box

Navigation

"Up" key
Key works in exactly the same way as key
, the selection box moving up rather than
d o w n .
Cyclical operation:
Both keys work cyclically, i.e. if the selection
box is at the bottom of the screen and key
is pressed again, the selection box moves to
the top of the screen. Likewise, if the selection
box is at the top of the screen and key
pressed, the selection box moves to the
bottom of the screen.
,
"+" and "–" keys
The "+" and "–" keys are used to move to the
right and to the left within the selection box. If
the function selected is temperature, these
keys are used to increase
the desired temperature as shown below:
32
:
and reduce
is