Technical Data - Beem CM5020D-GS Bedienungsanleitung

47
Problem
During use, an
unpleasant smell is
detected.
Warranty and Limitations of Liability
The warranty does not cover faults caused by incorrect handling, calcifi cation, damage or
attempted repairs. The same applies to normal wear and tear.
We do not accept any liability for damage or consequential damage resulting from:
•
failure to follow the operating instructions
• non-designated use
• improper or unsuitable handling
•
repairs which are not carried out properly
• unauthorised modifi cations
• use of outside parts or spare parts
•
use of unsuitable additional parts or accessories
Keep the original packaging during the warranty period of the device so that the device
can be properly packaged up if it needs to be returned. The warranty claim will lapse if any
damage is caused during transport.

Technical Data

Article number:
Model number:
Voltage supply:
Power:
Brewing pressure:
Protection class:
ID of operating instructions: Z 02012 M BE V2 0721 uh
Possible cause
The device is being used for the
fi rst time.
The device has previously been
descaled.
02012
CM5020D-GS
220 – 240 V ~ 50 – 60 Hz
3000 W
15 bar
I
Fix
A smell often develops when
new devices are fi rst used. The
smell should disappear once the
device has been used several
times.
Rinse out the device with fresh
water.
EN