Analogue Output - HYDAC ELECTRONIC HNS 3000 Bedienungsanleitung

HNS 3000 IO-Link

15.4 Analogue output

The universal output "ou2" can be set to 4 .. 20 mA or 0 .. 10 V (corresponding to
measuring range) setting and assignment to fluid level or to temperature.
Note:
If the sensor is operated in conjunction with an IO-Link master and if
pin 2 is used as an analogue output, pin 2 may not be connected with
the IO-Link master, as it does not support analogue signals.
Edition: 2022-07-13 HYDAC ELECTRONIC GMBH
Seite 19
Part no.: 669945 E