Organisational Measures; Transportation, Packaging, Storage; Transport; Packaging - HYDAC ELECTRONIC HDA 4400 Bedienungsanleitung

6

4.5 Organisational measures

 The operating instructions must always be kept accessible at the place of use of the
measurement system.
 In addition to the operating instructions, generally applicable legal and other binding
accident prevention and environmental protection regulations must be paid attention to
and must be mediated.
 The respective applicable national, local and system-specific provisions and
requirements must be paid attention to and communicated.
 It is mandatory for the operator to inform personnel on special operating features and
requirements.
E
 The personnel instructed to work with the measuring system must have read and
understood the operating instructions, especially section 4 Safety, prior to
commencing work.
 The name plates and any prohibition or information signs applied on the measurement
system must always be maintained in a legible state.
 Repairs may only be undertaken by the manufacturer or a facility or person authorised
by the manufacturer.

5 Transportation, Packaging, Storage

5.1 Transport

The measuring system is supplied in a robust cardboard box.
When receiving and unpacking, make sure the item has been delivered in full and look out
for any possible transport damage. If present, immediately show it to the shipper.

5.2 Packaging

Do not remove the packing until you are ready to install the unit.
Keep the packing of the device for eventual reuse in case of transport (changing
application areas) or re-storage, it provides the best protection for the device.

5.3 Storage

Information on the permitted environmental conditions at the storage place can be found in
chapter 11 Technical Data.

6 Disposal

If the measuring system has to be disposed of after expiry of its life cycle, the
corresponding national regulations are applicable.

7 Maintenance and servicing

All measurement systems of the HDA 4X00 series are maintenance-free. However, if there
is a cause for complaint, please contact HYDAC Systems & Services GmbH.

8 General overview

Pressure transmitter HDA 4000 with a flush membrane was designed specifically for
applications in which a standard pressure connection could become blocked, clogged or
frozen by the particular medium used.
Further applications include processes where the medium changes regularly and any
residues could cause mixing or contamination of the media.
Status: 2022-08-17 HYDAC ELECTRONIC GMBH
HDA 4400 / 4700 with flush membrane
Part No.: 669872