Dismantling And Disposal; Safety Notes For Dismantling And Disposal - Linde R200/1-BC Gebrauchsanleitung

Description
EN No changes of
valve control
when turning
the handwheel
Moisture on
pressure regu-
lator (NO dew,
rain or snow)
Icing on pres-
sure regulator
(NO dew, rain
or snow)
This table is not exhaustive. For questions and ambiguities please contact manufacturer.

10. DISMANTLING AND DISPOSAL

Once the system has reached its end-of-life, it must be dismantled and disposed of in an environmentally
compatible way.

10.1. SAFETY NOTES FOR DISMANTLING AND DISPOSAL

WARNING!
•
Risk of injury through incorrect dismantling!
RESIDUAL ENERGY STORAGE, SHARP EDGED COMPONENTS, TIPS AND CORNERS ON AND IN THE
SYSTEM OR ON THE REQUIRED TOOLS CAN CAUSE INJURY.
•
arrange enough space for working
•
be careful with sharp edges
•
pay attention for order and cleanness
•
loose components can cause accidents
•
dismantle the components properly. Bear in mind that some of the components are heavy. Use lifting
equipment if necessary
•
secure the components against falling or toppling over
•
In doubt ask manufacturer
Reason Solution
Defect Repair by
handwheel be- manufacturer
cause of too
high torque,
defect of
spindle, defect
of thread
Pressure regu- No failure, nor-
lator withdraw mal operating
energy from state
environment
through gas
expansion
Pressure regu- No failure, nor-
lator withdraw mal operating
energy from state ATTEN-
environment TION: keep
through gas functionality of
expansion, lim- contact gauges
ited delivery in mind, raise
performance quantity of
from pressure pressure gas
gas tanks, e.g. tanks
N2O, CO2
Valve Cylinder
Regulator
20/298
Line Gas
Regulator Supply Panel