General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PBSA 12 D2 Originalbetriebsanleitung

General description

The illustrations are on the
front and back fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Cordless Drill
- Storage case
- Instruction Manual
Pictured bit and drill not included.

Overview

1 Keyless drill chuck
2 Chuck ring
3 Torque adjustment ring
4 Battery Indicator
5 Speed selector
6 Direction of rotation switch
7 On/off switch
7 LED working light
9 Drill chuck aperture
10 Battery
11 Battery release button
12 Storage case
13 Charger
14 Bitholder

Functional description

The cordless drill with two-speed gearing
has a 19+1 level torque adjustment, left/
right running, a removable keyless chuck,
a 6-point bitholder and an LED working
light.
GB

Technical data

Cordless Drill ................PBSA 12 D2
Motor voltage U .......................... 12 V
Idling speed n
0
1st gear .............................0-350 min
2nd gear .........................0-1300 min
Maximum torque .......................... 28 Nm
Span-chuck ............................ 0.8-10 mm
Weight (without battery charger) .....1.0 kg
Drilling capacity
for wood .......................... max. 25 mm
for steel ............................. max. 8 mm
Sound power level
(L ) ................... 70,2 dB(A), K
pA
Sound power level
(L ) ................. 81,2 dB(A); K
WA
Vibration (a )
h
Drilling in metal .................. < 2.5 m/s
Screwdriving ...................... < 2.5 m/s
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
IE NI CY
= 5 dB
pA
= 5 dB
WA
K= 1.5 m/s
-1
-1
2
2
2
5