General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PABS 20-Li E6 Originalbetriebsanleitung

GB IE

General description

The illustrations are on the
front and back fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Cordless Drill
- 8 Screw bits, length 50 mm:
Cross recess: PH0, PH1, PH2
PZ0, PZ1, PZ2
Recess: SL5, SL6
- 8 drill bits: 1.5 mm, 2.5 mm, 3 mm,
4 mm, 5 mm, 6 mm, 8 mm, 10 mm
- Storage case
- Instruction Manual
Battery and charger are not
included.

Overview

1 Drill chuck aperture
2 Keyless drill chuck
3 Torque adjustment ring
4 Speed selector
5 Bit holder
6 Button for charge status display
7 Battery Indicator
8 Battery
9 Battery release button
10 LED working light
11 Direction of rotation switch
12 On/off switch
13 Drill bits
14 Screw bits
15 Storage case
16 Charger
17 Metal belt clip
18

Functional description

The cordless drill with two-speed gearing
has a 25+1 level torque adjustment, left/
right running, a removable keyless chuck
and an LED working light. Please refer to
the descriptions below for information on
how the operating elements work.

Technical data

Cordless Drill Set ....... PABS 20-Li E6
Motor voltage U ..........................20 V
Idling speed n
0
1st gear ............................ 0-400 min
2nd gear ......................... 0-1400 min
Maximum torque .......................... 40 Nm
Span-chuck ............................ 1.5-13 mm
Weight (without battery charger) .. 1.28 kg
Drilling capacity
for wood .......................... max. 30 mm
for steel ........................... max. 13 mm
Protection category........................... IPX0
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Sound pressure level
(L ) ....................72.1 dB(A), K
pA
Sound power level
(L ) ..................83.1 dB(A); K
WA
Vibration (a )
h
max. ............... <2,5 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
-1
-1
= 5 dB
pA
= 5 dB
WA
2; K= 1,5 m/s 2