Functions - Franke FRSM 302 C TD BK Installations- Und Gebrauchsanweisung

SWITCHING OFF THE COOKING AREA
The requested cooking zone must be activated and will be brighter.
• Return the setting to "0" by means of the key
RAPID SHUTDOWN OF THE COOKING AREA
• Select the cooking zone to turn o .
• Press and hold and
RESIDUAL HEAT INDICATOR "H"
If the temperature of the cooking area is still high (and a burn risk still
present) after it has been switched o , the display (3) for the area will
indicate the letter "H" (residual heat).
The letter will only switch o when the burn risk is no longer present
(approximately 60° C).
SWITCHING OFF THE HOB
The hob can be switched o at any time by means of the ON / OFF
switch (1).
DUAL DOUBLE CIRCUIT COOKING ZONES
ONLY FOR FRSM 302 C TD BK
DUAL CIRCUIT: comprising a central disk and external crown;
One disk zone or both (disk + crown/half-crown) can be switched on.

FUNCTIONS

SAFETY SHUTDOWN
In the event that one or more cooking areas is inadvertently left on,
the safety system will shut the zones down automatically after a certain
time has elapsed, after which the letter "H" or "h" will be displayed.
COOKING LEVEL OPERATING TIME H
0
1
2
3
4
5
6
7
8
9
TIMER FUNCTION
This automatic function also obviates the need for human intervention
during the entire cooking cycle. Once the set time on the timer has
elapsed, the cooking area is automatically switched o .
(4).
(4).
0
10
5
5
4
3
2
2
2
1
TURNING ON A DUAL DOUBLE CIRCUIT COOKING ZONE
ONLY FOR FRSM 302 C TD BK
After entering a value that is greater or equal to 1, the double circuit area
is enabled by pressing the cooking zone key (2) again. Only for this type
of heating plate with double circuits, horizontal dashes light up to
indicate how many circuits are turned on for that plate. 2 horizontal
dashes indicate that 2 resistors are on.
TURNING OFF THE DUAL DOUBLE CIRCUIT COOKING ZONE
ONLY FOR FRSM 302 C TD BK
1. The zone must be activated and, therefore, brighter.
2. When you touch the selection key of the zone involved again, one
circuit at a time is turned o . When you continue to press the
selection key intermittently, they are turned on and o at will (only
for double plates).
LOCKING THE COOKING SURFACE
The entire hob can be locked with a combination of keys.
Turn on the cooking surface and then press
down, press the select key on the left (2). L's appear. The purpose of this
lock is to prevent unintended operations.
While the lock is engaged, all operation of the keys is disabled, with the
exception of the OFF key (1). To unlock the hob, perform the same
operation: turn on the surface, press the
selection key to the left (2). The L's disappear.
ACTIVATION OF THE TIMER FUNCTION
1. The cooking zone must be activated, therefore, brighter.
2. Select a power level between 1 and 9.
3. Touch the timer key (5), the timer display shows 00 and the cooking
zone decimal point is highlighted (9).
4. Select the cooking time (from 0 to 99 minutes) using keys
and (4).
The timer function is automatically activated within a few seconds and
a ashing ‚t' will appear on the zone with the shortest timer setting.
The decimal point (9) of the cooking zone with timer setting remains
highlighted on the zone with the shortest timer setting.
The timer will start up automatically in a few seconds. Press and hold
down the or
function can apply to all the cooking zones by selecting them.
RAPID SHUTDOWN OF THE COOKING AREA AND RELATIVE TIMER
Select the cooking zone and then, press the key
Note that the timer function will also be deactivated.
TURNING THE TIMER FUNCTION OFF
When the set cooking time has elapsed, an acoustic signal sounds for
2 minutes. To interrupt the signal, simply press any key.
If you want to interrupt the timer before the programmed time period
has elapsed.
Press the timer key (5).
Press the key to reset the time (4).
– 10 –
key (4) and, holding it
key (4) and press the
key (4) to scroll the time setting. The timer
and (4).