Control Panel - MALTEC DH-50000X Bedienungsanleitung

 If tipped more than 45°, allow the unit to set upright for at least 24 hours before start
up.
 Keep doors and windows close for better energy saving.
 Do not operate or store the unit in direct sunlight or rain.
 It is normal for air outlet to feel warm to touch after continuous operation on hot days.
 Empty the water tank before moving the device.
 Make sure the Water tank is correctly fitted otherwise the unit will not operate properly.
 The dehumidifier starts up in the mode selected when the unit was last used.
 There is a protective 3-minutes time delay of the compressor. Wait 3 minutes for the
dehumidifier to resume dehumidification.
5. OPERATION

5.1 CONTROL PANEL

After switching on the power, all the indicators and the screen will be on for 1 second and
then off, the power indicator will be on and the machine will be in standby mode.
Press this button again, the machine will stop running, the power indicator will be off.
Press this button, you can choose different mode.
The unit have Sleep mode, Fan mode, Auto
mode.
● Auto dehumidifying mode: When first turn on the unit, it will enter into auto
dehumidifying mode or you can press the mode key to select this mode.
When ambient humidity ＞ set humidity +3%, the fan and compressor start working as
seated.
When ambient humidity ＜ set humidity -3%, the compressor stops working and the fan
stops working after 30 seconds' delay.
dehumidifying mode and Continuously dry
26/50