Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Preparatory work
Getting to know the appliance
Fig.
:
dust bin;
cord rewind button;
1
1
2
haust filter cover;
suction hose connection;
4
dust bin release;
dust bin handle;
5
6
bin cover;
ON/OFF button;
8
et;
connection cord;
10
bypass vent;
suction hose release;
13
14
ic tube;
telescopic tube release catch;
16
ry bracket;
switchable floor nozzle;
18
zle;
furniture brush;
20
Accessories (optional):
Unpacking and assembling
Check that the unpackaged contents are com-
1
plete. If you notice any transport damage or if an-
ything is missing, contact your dealer immediate-
ly.
Connect suction hose and appliance (Fig.
2
Connect the suction hose with the telescopic tube
3
and adjust the length of the telescopic tube (Fig.
Connect telescopic tube and switchable floor noz-
4
zle (Fig.
).
Ensure that the bypass vent (Fig.
4
5
is completely closed.
Using the accessories
CAUTION!
For hard floors, only use the switchable floor
nozzle (Fig.
1
/
) with the brush (Fig.
18
tended, as the hard floor may otherwise become
damaged.
CAUTION!
If using the turbo nozzle (Fig.
that the surface can withstand the rotating brush
without becoming damaged.
NOTE:
You can also use the suction nozzles without the
telescopic tube as necessary. To do so, connect
the required accessories directly to the handle
(Fig.
).
9
Connect the required accessory to the handle or
1
the telescopic tube (Fig.
accessory is securely connected. ➔ The appliance
can be connected.
ex-
3
dust
7
parking brack-
9
suction hose;
handle;
11
12
telescop-
15
accesso-
17
crevice noz-
19
mini turbo nozzle
A
1
10
) ex-
/
), make sure
1
A
9
).
Make sure that the
2
EN
Connecting the appliance
CAUTION!
If the red marking is visible (Fig.
the connection cord by pressing the cord rewind
button to pull in the cord up to the yellow mark
(Fig.
6
/
) (Fig.
2
cord might be damaged.
Pull the cable out of the appliance (Fig.
1
sert the plug into a mains socket.
Vacuum cleaning
Flexible vacuum-cleaning
Connect the required accessories >"Using the
1
accessories" on page 17.
>"Connecting the appliance" on page 17.
).
2
on the appliance, press the ON/OFF button (Fig.
➔ The appliance vacuums at full suction power.
3
).
To reduce the suction power, open the bypass
4
vent as required >"Regulating the suction power"
/
)
13
on page 17.
5
the ON/OFF button again (Fig.
switches off.
6
that the appliance operates with full suction power
when vacuum-cleaning the next time.
Regulating the suction power
To reduce the suction power, slide the bypass vent
1
open (Fig.
11
).
the bypass vent closed again (Fig.
Storing the appliance
NOTE:
If necessary, use the accessories mount (Fig.
to attach 2 accessories.
Switch off the appliance and pull the plug from the
1
socket.
Push the cord rewind button (Fig.
2
until the cord has been fully rewound (Fig.
Hang the telescopic floor nozzle or parquet nozzle
3
(connected to the telescopic tube or handle) in the
parking bracket (Fig.
/
6
1
7
). Otherwise, the connection
Connect the appliance
2
To switch off the appliance, press
). ➔ The appliance
8
Close the bypass vent (Fig.
To increase the suction power, slide
2
).
11
/
) (Fig.
).
1
12
9
17
), retract
).
In-
5
2
To switch
3
).
8
/
) so
1
13
/
)
1
17
/
)
1
2
).
7
Werbung
Inhaltsverzeichnis
