CT(E), CTLP, CT(E)S, CTW
4
Intended use
The cassette toilet is intended for installation and use in recreational vehicles such as
camper vans or motor caravans.
The 4050 cassette toilets can be installed in a wet room. The 4110 cassette toilets are
not intended to be installed in a wet room.
This product is only suitable for the intended purpose and application in accordance
with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
5
Technical description
The cassette toilet consists of a toilet permanently installed in the vehicle and a
removable, mobile cassette as a holding tank. The cassette is externally accessible
through a door. Depending on the model, the toilet is supplied with rinse water from
the vehicle-side freshwater tank or a tank integrated in the housing.
The following model versions of the toilet are available:
• CT4050, CT/CTE4110: Detached, without water tank, without console
• CTLP4050, CTLP4110: Detached, without water tank, low console
• CTS 4050, CTS/CTES4110: Detached, without water tank, with console
• CTW4050, CTW4110: Detached, with water tank in the console
EN
Intended use
19