Siemens SIMATIC NET CP 5511 Installationsanleitung Seite 61

C79000-Z8974-C70-02CP 5511 Communications Card under Windows 98, NT 4.0, 2000 Professional
Select the required license on drive A:\. Select the target drive for the
authorization in the "Authorization > Transfer" menu.
If you ever want to reformat your hard disk, you must first transfer the
license back to the key diskette. The program required for this
"AUTHORSW.EXE" is on the key diskette. If you do not remove the
license before you reformat, it will be destroyed and you will no longer
be able to use the product.
Make sure that you transfer the license back to the same key
diskette from which you originally installed it.
Uninstallers and If you uninstall this product with a software installer, the
the Authorization authorization may be lost.
Explanation:
The warning above applies to all users who installed this product with
an uninstaller.
If you want to uninstall the product using an uninstaller, first transfer the
authorization back to the key diskette using the "AUTHORSW.EXE"
program on the key diskette.
If you do not transfer the authorization back to the diskette, then
depending on the uninstaller, the authorization may be destroyed.
Note
If the license is not detected, a message is displayed regularly on
the screen during operation.
© Copyright by SIEMENS AG
11