Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly; Operation; Switching On/Off; Nozzle Usage - Parkside PWD 12 A1 Originalbetriebsanleitung

Nass-/trockensauger
Vorschau ausblenden Andere Handbücher für PWD 12 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Assembly

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
The appliance is supplied with the
textile filter bag (
1. Put on the feet (7)
2. Insert the filter:
-
Foam filter for wet vacuuming
(
15),
-
Material filter (
vacuuming,
-
Paper filter bag (
Never vacuum without a filter!
3. Place the motor housing (1) on
top of the dirt collector (6) and
close it
4. Connect the vacuum hose (13)
and the accessories.

Operation

Fully unwind the suction hose (
13) before commencing work.

Switching on/off

Connect the mains plug.
Switching on the vacuum:
On/off switch (
Switching off the vacuum:
On/off switch (

Nozzle usage

Floor nozzle (
tachment (
19):
for wet and dry vacuuming of smooth sur-
faces and fitted carpets.
16) fitted.
16) for dry
17).
with the clips (8).
3) in position "I".
3) in position "O".
18) with insert at-
GB
Floor nozzle (
attachment (
for wet and dry vacuuming of fitted carpets
and for removing persistent dirt.
Press the clips on the right and left side
of the floor nozzle (
the insert attachment (
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
for vacuuming gaps, corners and radiators.

Wet vacuuming

1. For wet vacuuming or to vacuum wa-
ter, fit the foam filter (15) to the filter
basket (21).
To avoid tearing the foam filter (15):
- Use only a dry filter;
- Before inserting, twist the edge of
the filter slightly and then roll it back.
2. Suctioning up (draining) water: place
the suction hose (
(
14) into the water tank and suc-
tion up the water.
3. Empty the waste container immediately
after vacuuming because it is not de-
signed to store liquids (see "Cleaning/
Maintenance").
Never reach into the water to
be suctioned up. Danger of
electric shock.
If the waste container is full, a float
closes the suction opening, and the
vacuum operation is interrupted.
Switch off the machine and empty
the waste tank.
IE
NI
18) without insert
19):
18) and remove
19).
20):
13) on the handle
CY
9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis