Herunterladen Inhalt Inhalt Diese Seite drucken

Organizational Measures; Personnel Qualification; Obligations - TR-Electronic LLB65-00100 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Basic safety instructions

2.7 Organizational measures

 The User Manual must always be kept accessible at the place of use of the
measuring system.
 In addition to the User Manual, generally applicable legal and other binding
accident prevention and environmental protection regulations are to be observed
and must be mediated.
 The respective applicable national, local and system-specific provisions and
requirements must be observed and mediated.
 The operator is obliged to inform personnel on special operating features and
requirements.
 The personnel instructed to work with the measuring system must have read and
understood the User Manual, especially the chapter "Basic safety instructions"
prior to commencing work.
 The nameplate and any prohibition or instruction symbols applied on the
measuring system must always be maintained in a legible state.
 Do not undertake any mechanical or electrical modifications on the measuring
system, apart from those explicitly described in this User Manual.
 Repairs may only be undertaken by the manufacturer or a facility or person
authorized by the manufacturer.

2.8 Personnel qualification; obligations

 All work on the measuring system must only be carried out by qualified personnel.
Qualified personnel includes persons, who, through their training, experience and
instruction, as well as their knowledge of the relevant standards, provisions,
accident prevention regulations and operating conditions, have been authorized
by the persons responsible for the system to carry out the required work and are
able to recognize and avoid potential hazards.
 The definition of "Qualified Personnel" also includes an understanding of the
standards VDE 0105-100 and IEC 364 (source: e.g. Beuth Verlag GmbH, VDE-
Verlag GmbH).
 Define clear rules of responsibilities for the assembly, installation, start-up and
operation. The obligation exists to provide supervision for trainee personnel !
 TR-Electronic GmbH 2011, All Rights Reserved
Page 82 of 139
All manuals and user guides at all-guides.com
TR - ELE - BA - DGB - 0022 - 04
Printed in the Federal Republic of Germany
02/08/2016

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Llb65-00101Llb500-00100Llb500-00101

Inhaltsverzeichnis