Measuring Cycle; Count Direction; Offset - TR-Electronic LLB65-00100 Benutzerhandbuch

Parameterization and configuration

8.5.3 Measuring cycle

With the measuring cycle the sampling rate of the distance measuring is adjusted. The
value 0 adjusts automatically the fastest sampling rate. The measurement can need at
LLB-65 0.15 up to approx. 4 s and at LLB-500 0.04 up to approx. 4 s depends on the
surface condition. The value 0xFF deactivates this function and the laser diode is
switched off. 1 digit corresponds the time of one second. Thus, sampling rates of 1 s
to approx. 4 min. can be adjusted.
Lower limit
Upper limit
Default

8.5.4 Count direction

Definition of the counting direction for the position value.
Selection
Positive
Negative

8.5.5 Offset

Definition of the momentarily active function: Adjustment or Offset
Selection
Offset
Adjustment
 TR-Electronic GmbH 2011, All Rights Reserved
Page 118 of 139
All manuals and user guides at all-guides.com
Availability
TR-Mode
Page 107
0x00
0xFF
0x00
Availability
TR-Mode
Page 107
Description
with increasing distance to the laser,
values increasing
with increasing distance to the laser,
values decreasing
Availability
TR-Mode
Page 107
Description
Function in accordance with the description in
chapter "Offset value", page 117.
Function in accordance with the description in
chapter "Preset adjustment function", page 116.
TR - ELE - BA - DGB - 0022 - 04
X TR-Mode extended
Page 110
X TR-Mode extended
Page 110
X TR-Mode extended
Page 110
X
X
Default
X
X
Default
X
Printed in the Federal Republic of Germany
02/08/2016