Moon Phase; Maintenance - Konig KN-WS210 Anleitung

3. Activate/Deactivate the Alarm Function
In normal display mode, press the "AL" to activate or deactivate the alarm function. The alarm bell sign
(ALM) will appear or disappear accordingly. When the alarm is set, the backlight will turn on.
4. SNZ/L Button
When the alarm goes off, press SNZ/L to stop the snooze. The alarm will go off again after 5 minutes.
Press SNZ/L in normal display mode to turn on the backlight for about 5 seconds.
5. ▲ button
Press the ▲ button in normal time display mode to switch between 12/24 hour format. AM or PM will
be displayed if you have chosen for the 12 hour format.
6. ▼ Button
Press this button in normal display mode to toggle between degrees Celsius and Fahrenheit.
7. Volume Control
The backlight will go on for about 5 seconds when there is a sound above 80 dB within 1 metre.
Touching the product or pressing the button will also turn on the backlight.

8. MOON PHASE

The weather station automatically calculates the moon phase. The moon phase has been divided into
8 phases.
Temperature and Humidity:
1. Temperature range indoors: 0°C – 50°C (32°F – 122°F). Temperature range outdoors: -20°C –
50°C (-4°F – 122°F).
2. Range of humidity: 20% – 90%.
3. Tendency of temperature change: one check per hour. The arrow will be flat if the temperature
changes more than 1°C compared to previous data.
Transmitter Usage:
* Each weather station has a transmitter.
* The maximum distance between the station and the transmitter is 20 m in open area. A larger
distance or buildings standing between the station and the transmitter will affect the signal
transmission and reception.
* The transmitter should be kept away from rain or water.
Remarks:
1. 3X AAA batteries are needed to operate the weather station (not incl.).
2. 2X AAA batteries are needed to operate the transmitter (not incl.).
3. The transmitter distance: 20.
4. Transmits once every second. The light will flash at the same time.
5. All functions will reset when the batteries are replaced.
Safety precautions:

Maintenance:

Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the
product to water or moisture.
3