Olimpia splendid CALDOSILENT Installations-, Bedienungs- Und Wartungsanweisungen Seite 31

Knob "9"
TIMER function
CALDOSILENT ECO version)
• This appliance is equipped with an interval
timer (24h), the knob (9) is composed of 96
segments and each segment represents 15
minutes.
• Before proceeding with setting of the timer,
current time MUST be set:
- Rotate the knob (9) clockwise by aligning the arrow with the current time.
• To set timer mode, proceed as described below:
- Push outwards the segments which represent the time in which the
appliance must stay on.
- Push inwards the segments which represent the time in which the appliance
must switch off.
Example:
To set the unit so as that it switches on at 9 o'clock and off at 13 o'clock, push
all the segments between 9 and 13 outwards, and push other segments all
inwards.
- Set the switch (10) to "
If the switch (10) is moved to the symbol "I", the appliance starts
to work continuous function deactivating the "Timer" mode.
The settings of the "Timer" mode remain saved up to switching
off of the appliance. If the plug is disconnected from the power
socket, the current time does not update automatically.
When the power plug is reconnected, current time MUST be set
again as described above.
(not available
" to enable the timer.
for
CALDOSILENT
10
EN- 13