Olimpia splendid CALDOSILENT Installations-, Bedienungs- Und Wartungsanweisungen Seite 30

• Place the appliance in an appropriate environment and on a stable and flat
surface.
• Make sure that curtains or other objects do not obstruct the air flow (fig. 3).
• Leave at least 1,5m of free space on the sides,
behind the appliance and above it (fig. 1).
• Make sure the knob (7) is set to "O" and the switch
(10) is set to "I".
• Connect the plug to the power socket.
• Make
correspond to what is described
on the data plate of the appliance.
• Arrange cord away from traffic areas so that it will not be
tripped over.
3 - USE
Knob "7"
• Knob set to "O" :
• "VENTILATION" function :
• "MINIMUM POWER" function :
• "MAXIMUM POWER" function :
Knob "8"
• Start the appliance by rotating the knob (7) to " I " position or to "II" position and
make sure the switch (10) is set to "I".
• To set the room temperature to a specific value (thermostatation), rotate the knob
"8" clockwise until it stops.
• Once the desired temperature of the room has been reached, slowly rotate the
knob "8" anticlockwise until the appliance switches off.
• At this point, the appliance will reactivate automatically when the room
temperature lowers beyond the set limit and will switch off again once the room
temperature reaches the set value.
To activate the antifreeze function, it is necessary to turn the knob
(8) completely anticlockwise and to select the heating function
by means of the knob (7), always make sure the switch (10) is
set to "I".
EN- 12
sure the mains data
appliance OFF
rotate the knob to "
rotate the knob to " I " position.
rotate the knob to " I I " position.
" position.