TFA TWIN PLUS 30.3049 Bedienungsanleitung Seite 10

TFA_No_30.3049_Anleitung_08_22
Wireless Thermo-Hygrometer
7.4 Comfort level
• On the display appear four different faces to indicate the comfort level for
temperature and humidity.
Cold Comfort
7.5 Alarm for temperature and humidity
7.5.1 Adjust the alarms
• Press and hold the ALERT button at the backside of the base station in
normal mode.
• and flash on the display.
• Press ▼/°C/°F or ▲ button to toggle between indoor or outdoor area.
• Press the ALERT button again.
• and the default or the last adjusted upper temperature limit appear on
the display.
• Press the ▼/°C/°F or ▲ button to adjust the desired upper temperature
limit.
• Confirm with the ALERT button.
• and the default or the last adjusted lower temperature limit appear on
the display.
• Press ▼/°C/°F or ▲ button to adjust the desired lower temperature limit.
• Confirm with the ALERT button.
• and the default or the last adjusted upper humidity limit appear on the
display.
• Press ▼/°C/°F or ▲ button to adjust the desired upper humidity limit.
• Confirm with the ALERT button.
• and the default or the last adjusted lower humidity limit appear on the
display.
• Press ▼/°C/°F or ▲ button to adjust the desired lower humidity limit.
• Confirm with the ALERT button.
7.5.2 Activate the alarms
• Press SEARCH/IN/OUT button in normal mode to toggle between indoor
or outdoor area.
• Confirm with the ALERT button.
• appears on the left display. The temperature alarm function is actived.
18
23.08.2022 12:03 Uhr
Hot Very hot
Seite 10
Wireless Thermo-Hygrometer
• Press the ALERT button again to activate only the humidity alarm.
appears on the right display.
• Press the ALERT button again to activate both alarms.
both displays.
• Press the ALERT button again to deactivate the alarm functions.
appears on both displays.
7.6 Case of alarm
• In the case of an alarm the corresponding symbol flashes
alarm sound is acitivated. You can stop the alarm by pressing any button.
If the alarm will not turned off, it will automatically turn off after approxi-
mately 2 minutes.
7.7 Indication of frost
• If the outside temperature is between -2 ° C and +3 ° C the snowflake
symbol appears on the display.
7.8 Outdoor transmitter
7.8.1 Temperature indication
• Press °C/°F button to change between °C (Celsius) or °F (Fahrenheit) as
temperature unit.
7.9 Positioning and fixing of the base station and the transmitter
• With the foldable leg at the back of the base station it can be placed onto
any flat surface or wall mounted at the respective location by the hanging
hole at the back of the unit. Avoid the vicinity of any interfering field like
computer monitors or TV sets and solid metal objects.
• With the foldable leg at the back of the transmitter it can be placed onto
any flat surface or wall mounted at the respective location by the hanging
hole at the back of the device. Choose a shady and dry position for the
transmitter. (Direct sunshine falsifies the measurement and continuous
humidity strains the electronic components needlessly).
• Check the transmission of 433 MHz signal from the transmitter to the
base station (transmission range 30 m free field). Within ferro-concrete
rooms (basements, superstructures), the received signal is naturally
weakened.
• If necessary choose another position for transmitter and/or base station.
appears on
dis-
and an
19