Firmware - Devolo Magic 1 WiFi 2-1 Handbuch

Restoring the device configuration
An existing configuration file can be sent to the
devolo Magic 1 WiFi in the System
on area and enabled there. Select a suitable file via
the Select file ... button and start the operation by
clicking the Restore button.
Factory Settings
The devolo Magic 1 WiFi is reset to the original fac-
tory defaults in the System
with the Factory Reset option.
Doing so causes you to lose your personal
WiFi and PLC settings. The last-assigned
passwords for the devolo Magic 1 WiFi are
also reset.
For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there as a file and
devolo Magic 1 WiFi. This function can be useful
for creating a variety of configurations that will let
you quickly and easily set up the device for use in
different network environments.
Reboot device
In order to reboot the devolo Magic 1 WiFi, select
the Reboot button in the System
on area.

Configurati-

Configuration area
reloaded into the

Configurati-
Network configuration 48

4.7.4 Firmware

The firmware of the devolo Magic 1 WiFi includes
the software for operating the device. If necessary,
devolo offers new versions on the Internet as a file
download, for example to modify existing functi-
ons.
Current firmware
The currently installed
devolo Magic 1 WiFi is displayed here.
Searching for and updating firmware automati-
cally
The adapter can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The devolo Magic 1 WiFi lets you know
when a new firmware version becomes
available. The option is enabled by default.
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The devolo Magic 1 WiFi automatically up-
dates its firmware. The option is enabled by
default.
firmware of the
2-1
devolo Magic 1 WiFi