Time switch
Rex2000 w72/2
NT 29 18 43 04
24
6
7
5 6
3 4
1 2
18
12
OK
ME NU
2 4
6
7
5 6
3 4
1 2
1 8
1 2
OK
M EN
U
498 32
044 09
Presentation
Summer/winter
Real time, switching time
Clr = delete switching times
Copy = copy switching times
Actual day of the week
or program day
Segment display of the
existing program
1 segment = 30 minutes
Button Menu
activates the menu or
breaks off the process
Button moves the flash
Technical data
Supply voltage:
230V 50/60Hz
Consumption:
ca. 1,1W
Contact rating:
2 changeover contact 8A 250V~µ cos ϕ = 1
Parallel compensation:
60VA max. 7µF
Accuracy:
±1 s/day under typical installation conditions
Terminal capacity:
single strand
1,5 to 4 mm
Program pictures:
28 per channel
Battery reserve:
10 years
Storage ambient:
-20°C to +60°C
Working ambient:
-20°C to +55°C
Safety notice
• Assembly and installation of this product may be carried out by a specialist only. • To
guarantee electrical safety the product has to be installed in the applicable product specif-
ic environment with all accessories included in the delivery. • To ensure electromagnetic
tolerance as required by the provisions to identify CE- products in applicable ambits of
EMV 89/336/ CE-lines, adequate protective measures have to be found for consumers of
high voltage dropout - current ( for example motor run devices or lamps exceeding power
rating of 800W ) or commutation – times < 24 seconds. • Modification of the product
results in the loss of all warranty claims. • In case the time switch is installed between
exothermal facilities causing an ambient temperature of over 55°C, a vacuum has to be
created between the exothermal facilities and the time switch ( f. e.
stock number 044 40 or 1 vacuum module, stock number 044 41.
Function
The Rex2000 w72/2 is a digital 2 channel 7 day time switch with a circular segmented display. Up to 4 program pictures per day and channel
can be set. A program picture incorporates both ON and OFF time. If no button is pressed for 60 seconds during programming the time switch
goes back to the start position. The copying function enables programs to be copied to other days. Minimum switching time is 1 minute. The
switching times are protected but can be overlaid by other programs. Programs are displayed with a minimum segment size of 30 minutes.
The time and the week days are presented digitally. The summer-/winter changeover can be programmed for hand or automatic operation.
Menu
SET TIME CHECK... ON
Day/month/year
PROG DATE NEW...OFF
SU/Wi
D/M/Y
Symbol for automatic operation
24
Symbol for manual override
18
6
Symbol for continuous override ON
1234567
Symbol for continuous override OFF
12
1 2
State of contact
ON
OFF
MENU
OK
Actual selected channel display
Button OK
confirms the input
Button minus and plus
Mains failure
changes the values
Mains failure will be displayed by no U.
Buttons are inoperative.
Reset is possible.
496 11
496 10
496 09
120V 50/60Hz
24V AC/DC
multi strand
1,5 to 2,5 mm
2
2
1
⁄
vacuum module,
2
1. Starting
Reset 1 Switching program remains
Press
Reset 2 Switching program deleted
Press all 5 buttons together.
First release button
all other buttons.
2. Setting actual time
Button
Select SET TIME... with button
with button
SET TIME with button
Set actual hour with buttons
with button
Set actual minute with buttons
with button
Operating instructions
Connection
22
11 14
12
L
N
1200W
1200W
2300W
1800W
MENU
together
MENU
, after 3 seconds release
MENU
activates the menu.
and confirm
OK
. Confirm once more
OK
.
and confirm
OK
.
and confirm
OK
.
GB
24
21
100W
100W
1800W
1800W
24
18
6
1234567
12
1 2
SET TIME
24
18
6
1234567
12
1 2