Bosch Intuvia 100 Benutzerhandbuch Seite 70

English – 4
If you do not reactivate walk assistance within 10 s, walk as-
sistance automatically switches off.
Walk assistance is always ended if:
– the rear wheel jams,
– the bicycle cannot move over ridges,
– a body part is blocking the bike crank,
– an obstacle continues to turn the crank,
– you start pedalling,
– the (9) button or on/off button (1) is pressed.
Walk assistance has a roll-away lock, i.e. even after walk as-
sistance has been used, rolling backwards is actively curbed
by the drive system for a few seconds, and you cannot push
the eBike backwards or can only do so with difficulty.
The push assistance function is subject to local regulations;
the way it works may therefore differ from the description
above, or the function may even be deactivated completely.
ABS – anti-lock braking system (optional)
If the bicycle is equipped with a Bosch eBike ABS, the ABS
LED (4) lights up when the eBike system starts.
After moving off, the ABS internally checks its functionality
and the ABS LED goes off.
In the event of a fault, the ABS LED (4) lights up, together
with the orange flashing assistance level LED (5). You can
acknowledge the error with the select button (2); the flash-
ing assistance level LED (5) goes out. While the ABS LED (4)
is lit up, the ABS is not in operation.
For details on the ABS and how it works, please refer to the
ABS operating instructions.
Establishing a smartphone connection
In order to be able to use the following eBike functions, a
smartphone with the eBike Flow app is required.
Connection to the app occurs via a Bluetooth® connection.
Switch on the eBike system and do not start riding the eBike.
Begin Bluetooth® pairing by pressing and holding (> 3 s) the
on/off button (1). Release the on/off button (1) as soon as
the topmost bar on the battery charge indicator shows the
pairing process by flashing blue.
Confirm the connection request in the app.
Activity tracking
In order to record activities, it is necessary to register and
log into the eBike Flow app.
To record activities, you must consent to the storage of your
location data in the app. Without this, your activities cannot
be recorded in the app. For location data to be recorded,
you must be logged in as the user.
<eBike Lock>
The <eBike Lock> can be activated for each user via
the eBike Flow app. In the process, a key for unlocking the
eBike is saved on the smartphone.
The <eBike Lock> is automatically enabled in the following
cases:
– Switching off the eBike system via the control unit
– Automatically switching off the eBike system
0 275 007 3RL | (09.03.2022)
– Removing the on-board computer
If the eBike system is switched on and the smartphone is
connected to the eBike via Bluetooth®, the eBike will be un-
locked.
<eBike Lock> is linked to your user account.
If you lose your smartphone, you can log in to your user ac-
count on the eBike Flow app using another smartphone and
unlock then the eBike.
Warning! If you select a setting in the app that could have
negative consequences in combination with the <eBike
Lock> (e.g. deleting your eBike or user account), you will be
shown warning messages beforehand. Please read through
these thoroughly and adhere to the warnings that are is-
sued (e.g. before deleting your eBike or user account).
Setting Up the <eBike Lock>
In order to be able to set up the <eBike Lock>, the following
conditions must be fulfilled:
– The eBike Flow app is installed.
– A user account has been created.
– The eBike is not currently updating.
– The eBike is connected to the smartphone via Bluetooth®.
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike battery is sufficiently charged and the charging
cable is not connected.
You can set up the <eBike Lock> in the eBike Flow app in
the Settings menu item.
From now on, you can deactivate the assistance from your
drive unit by switching on <eBike Lock> in the eBike Flow
app. This deactivation can only be can only be overridden if
your smartphone is in the vicinity of the eBike system when
the system is switched on. To do this, your smartphone must
have Bluetooth® switched on and the eBike Flow app must
be active in the background. The eBike Flow app does not
need to be open. When the <eBike Lock> is activated, you
can continue to use your eBike without assistance from the
drive unit.
Compatibility
The <eBike Lock> is compatible with these Bosch eBike
product lines:
Drive unit
BDU374x
BDU33xx
How it works
In combination with the <eBike Lock>, the smartphone
functions similarly to a key for the drive unit. The <eBike
Lock> is activated by switching off the eBike system. As long
as the <eBike Lock> is active after the function is switched
on, this will be indicated by the operating unit LED Remote
flashing white and by a padlock symbol on the display.
Note: The <eBike Lock> alone does not provide adequate
theft protection; it is simply a supplement to a mechanical
lock. The <eBike Lock> does not provide any form of mech-
anical lock for the eBike. Only the assistance from the drive
unit is deactivated. The drive unit will be unlocked for as long
as the smartphone is connected to the eBike via Bluetooth®.
70
Product line
Performance Line CX
Performance Line
Bosch eBike Systems