Dab+ Operation - LENCO PDR-036 Benutzerhandbuch

DAB +/FM/Bluetooth/AUX
When the unit is turned on, press the SOURCE button to toggle between DAB +, FM,
Bluetooth and AUX mode.
Volume Control
Tune the rotary knob to change the volume.
Adjusting the Antenna
The telescopic antenna at the rear panel of the unit should be fully extended to ensure a
good DAB +/FM reception. Alter the antenna position for the best reception.

DAB+ OPERATION

The first time the DAB + mode is selected, it will automatically scan for available DAB +
stations. Wait until the scanning has finished. The display will show the scanning progress.
Progress bar
Full Scan
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the
3. Then press the ENTER knob to start auto-scanning the available stations.
Manual Scan
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the
selected and then press the ENTER knob.
3. Rotate the ENTER knob (or press the
(5A - 13F).
4. Press the ENTER knob to confirm.
5. To select another channel (example 5A - 13F), press the
press the ENTER knob to confirm.
6. To quit the menu control, press the BACK button repeatedly.
Tuning
After scanning all the available DAB stations, press the
navigate the station list. Then press the ENTER knob to tune to the station within a few
seconds.
Storing DAB + Presets
You can save up to 20 DAB + stations.
1. Tune to the station you wish to store.
or button) until the "Full Scan" is selected.
or button) until the "Manual Tune" is
or button) to select the desired channel
or
8
Number of
stations found
or button and then
button to display and