AEG Powertools ST 500 Gebrauchsanleitung Seite 3

Brief description
The stroke-rate (= movements per minute of
the saw blade) can be infinitely varied by
means of the adjustment wheel.
(only applicable for STE 500, STEP 500)
Transparent cover for
optimum sawdust
removal.
The sawdust blower
removes sawdust ahead
of the cut – very practical
when sawing along a line.
The anti-splintering device
almost entirely prevents the
edge of the wood from
splintering. (Accessory*)
*Not included in standard
equipment, available as an
accessory.
The base plate can be tilted to both sides
o
by 45 for bevel cuts.
The vibration damper permits quieter
running by means of a counterweight on the
plunger.
ENGLISH
2
The on-off switch can be fixed in the "On"-
position for continuous operation by means of
the locking button.
The on-off switch is shaped in such a
way that it can be used from the
forward or the rear holding position.
I I I
The built-in pendulum stroke improves the cutting
performance. The pendulum stroke of the saw blade
means it is only pressed against the material on the
reverse stroke (working stroke) and lifted off the
material on the forward stroke.
Result: better extraction of sawdust, lower friction
–> higher cutting performance.
The pendulum stroke can be adjusted by the
pendulum stroke control and thus adapted to different
kinds of material. (only applicable for STEP 500)
Modifications: Text, diagrams and data are correct at the time of printing.
In the interest of continuous improvement of our products, technical
specifications are subject to alteration without prior notice.
Integrated suction
channel for connection
to a vacuum-cleaner.
Integrated tool storage for spare
blade.
ST 500, STE 500, STEP 500