Hitachi PC-ARFP1E Installations- Und Betriebshandbuch Seite 36

MENU OPERATION
14.5.3 Schedule ON/OFF setting
This function is used to deactivate the schedule operation
temporarily.
The schedule operation will not be carried out when "OFF" is set
in this function.
This function is used to apply for long period of holidays.
1 Select "Schedule Timer" from the menu and press "OK".
OK
OK
2 Select "Schedule ON/OFF" by pressing " " or " " and press
"OK". The confirmation screen will be displayed.
OK
OK
14.6 INDIVIDUAL LOUVER SETTING
14.6.1 Setting
This setting is available only for the indoor unit adopting the
individual louver. The each louver angle can be set individually.
?
N O T E
• This function is available only when the indoor unit corresponds to
the individual louver.
• This function cannot be set when the unit is stopped.
• The fan speed will be changed to "LOW" while this function is being
set. (After the setting is completed, the unit operation will be back to
normal).
• As for "Start-up of Heating Operation", "During Defrost Operation"
and "Activation of Thermo-Controller", all the louver angles will be
fixed at horizontal position automatically even when this function is
activated.
• This function will not be available if 2 (two) remote control switches
(including multifunctional remote control switch + wireless remote
control switch) are used.
• With one multifunctional remote control switch, the maximum of 4
(four) indoor units can be set for this function.
28 PMML0404A rev.1.1 - 06/2022
Menu 15:10(Fri)
Filter Sign Reset
Elevating Grille
01
Function 3 /
Simple Timer 03
Schedule Timer
SEL. OK ENT. RTN.
Schedule Timer 15:10(Fri)
Day/Time Setting
Holiday Setting
Schedule ON/OFF
SEL. OK ENT. RTN.
3 Select "Yes" by pressing " " or " " and press "OK". The
schedule ON/OFF setting will be confirmed and the screen
will return to the normal mode.
" " will be turned on when the setting of schedule operation
is valid.
" " will be turned off when the setting of schedule operation
is invalid.
OK
OK
?
N O T E
When the setting of schedule operation is invalid, the schedule operation
will not be activated.
1 Select "Louver Setting" from the menu and press "OK".
The individual louver setting menu will be displayed.
OK
OK
2 Select "Louver Setting" from the individual louver setting
menu and press "OK".
Louver Setting
Louver Setting
Cancel INDV Louver SET
SEL.
?
N O T E
If the number of indoor unit connected with the remote control switch is 1
(one), (4) will be displayed after the procedure (2).
Schedule ON/OFF 15:10(Fri)
Turn ON schedule function?
Yes No
SEL. ENT. RTN.
OK
Menu 15:10(Fri)
Louver Setting
Louver Open/Close
02
VENTI
/
Total Heat Exchanger SET 03
Motion Sensor Setting
SEL. ENT. RTN.
OK
ENT. RTN.
OK