Activating The Auto Hold (Ahold) Function; Activatingbeeps (Beep) - Seca 677 Gebrauchsanweisung

Activating the auto hold
(Ahold) function
Activating beeps
76 •
When you activate the auto hold function, the measure-
ment result for every weighing operation continues to
be displayed after the weight has been removed from
the scale. It is then no longernecessary to activate the
Hold function manually for each individual weighing
operation.
1. Select the item "Ahold" fromthe menu.
2. Confirm your selection.
The current setting is displayed.
3. Select the desired setting:
4. Confirm your selection.
You exit the menu automatically.
You can set whether a beep is heard every time a key
is pressed and when a stable weight value is achieved.
(BEEP)
The latter is significant for the Hold/auto hold function.
1. Select the item"BEEP" fromthe menu.
2. Confirm your selection.
3. Select a menu item.
4. Confirm your selection.
The current setting is displayed.
5. Select the desired setting:
6. Confirm your selection.
You exit the menu automatically.
7. If you also want to activate beeps for the second
function, repeat the process.
NOTE
This functionis activated at the factory on some
models. You can deactivate the function if
desired.
– on
– off
NOTE
The "Beep when weight is stable" functionis
activated at the factory. You can deactivate this
function if desired.
– Press: beep when key is pressed
– Hold: beep when weight value is stable.
– on
– off