Getting Started - Remington X7 Limitless Rotary Shaver Bedienungsanleitung

GETTING STARTED

CHARGING
• It is recommended to fully charge your product before using for the first time.
• Ensure the product is switched off.
• Connect the product to the USB cable and then to the USB end of the cable to a
powered USB port.
CHARGING INDICATOR LIGHTS
• The bottom two (red) lights show charging status during charging. When the charging
level is below 50%, the bottom light will fade on and off. When charging is over 50%,
the bottom light will stay on and the next light will fade on and off. Once charging is
complete, the green light will turn on briefly, then switch off.
• If your shaver does not run when you switch it on, and the bottom two leds flash
rapidly for 5 seconds, your shaver needs charging.
• Run time from fully charged is up to 60 mins.
• Charge time from empty is 90 mins.
• Do not recharge your product after each use as this will shorten the life of the battery.
• Note: To preserve the life of your batteries, let them run out every 6 months then fully
charge.
QUICK CHARGE FEATURE
• Your shaver has a 5 minute quick charge feature that will provide enough charge for 1
shave (3 minutes).
INSTRUCTIONS FOR USE
SHAVING
1. Switch the shaver on by pressing the on/off button.
2. Stretch the skin with your free hand so the hairs stand upright.
3. Only apply light pressure on the shaving head while shaving (pressing too hard can
cause skin irritation).
4. Use short, circular strokes.
SHAVING WITH SHAVING GEL
• Follow the same instructions as dry shaving if using shaving gel.
• CAUTION After use with shaving gel, please rinse the head and cutters under warm
water to clean away any excess gel and debris.
TURBO FEATURE
• Use the Turbo feature to shave thick stubble. Press the turbo button to operate the
shaver in Turbo mode. The turbo button will light up green. Press the turbo button
again to deactivate turbo mode.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
RS
UA
BG
AE
5