7. Connect the appliance to the mains properly.
8. The rating plate is inside the appliance or at the back.
2.2 Condensation strip
I
1. Before installation: you must install the condensation strip
of the worktop to protect it from the water vapor released by the appliance. The
condensation strip deflects the water vapor from the worktop.
2. You will find the condensation strip inside your appliance.
3. Clean the bottom side of the worktop properly before you install the
condensation strip.
4. Remove the protective foil from the adhesive surface of the condensation strip.
5. Stick the condensation strip on the bottom side of the worktop.
NOTICE! Improper installation of the condensation strip may cause
damage to the worktop.
Depending on model.
33
Depending on model.
34
NSTALLATION OF THE CONDENSATION STRIP
(D
EPENDING ON MODEL
)
C
ONDENSATION STRIP
~
~
92
33
on the bottom side
34