Checking The Battery Status; Qi Wireless Charging - Tronic Qi TPBQ 10000 A1 Bedienungs- Und Sicherheitshinweise

During the charging process, the LED display for battery
capacity
5
level of the internal battery in percentage.
NOTE: This is approx percentage of power bank capacity
but not actual measurement.
ATTENTION! Do not connect any device to the power
bank for charging while the power bank itself is charging.
Remove the charging cable from the power bank when it is fully
charged.

Checking the battery status

You can check the battery status on the LED display for battery
capacity of the power bank
5
Briefly press the On/off button
battery capacity
the internal battery for approx. 30 seconds.

Qi wireless charging

Put your Qi compatible device to be charged on the centre
of the Qi charging surface
Slightly adjust the charging position of the device to be
charged so that its charging surface is facing down to the
centre of the Qi charging surface
Briefly press the On/off button
bank 1 . The wireless charging will then start automatically.
When Qi charging is active, Qi status indicator
blue*. The LED display for battery capacity
current charge status of the internal battery throughout the
wireless charging process.
flashes and shows you the appropriate charge
shows the approximate charge status of
5
at anytime.
1
. The LED display for
3
2 of the power bank
of the power bank
2
3 to switch on the power
1 .
1
4 flashes
shows the
5
GB/IE/NI 17
.