Basic Parameters - Roborock Q7 Max Benutzerhandbuch

Note: Purchase an additional filter and alternate if
necessary.
Mop Cloth
C6
* Clean after each use and replace every 3-6 months
Remove the mop cloth from mop cloth
mount. Clean the mop cloth and air-dry it.
Note: A dirty mop will affect the mopping performance.
Clean it before use.
Robot Sensors
C7
* Clean monthly
Use a soft, dry cloth to wipe and clean all
sensors, including:
C7-1—Dock Locator
C7-2—Wall Sensor
C7-3—Four Cliff Sensors
Charging Contact Areas
C8
* Clean monthly
Use a soft dry cloth to wipe the charging
contacts on the charging dock and the robot.
Battery
The robot is equipped with a high-performance
lithium-ion rechargeable battery pack. To
maintain battery performance, keep the robot
charged during normal use.
Note: If the robot will be left unused for a long period,
turn it off and charge it at least every three months to
avoid battery damage caused by over-discharge.

Basic Parameters

Robot
Model Q380RR
14.4V/5200mAh
Battery
lithium-ion battery
Weight Approx. 4.7kg
Rated Input 20VDC 1.2A
Charging Time < 6 hours
Note: The serial number is on a sticker on the underside
of the robot.
Charging Dock
Model CDZ11RR or CDZ12RR
Rated Power 28W
Rated Input 100-240V~
Rated Output 20VDC 1.2A
Rated Frequency 50-60Hz
14.4V/5200mAh
Charging Battery
lithium-ion battery
09