Maintenance And Storage - Argo POLIFEMO TALAO Gebrauchsanleitung

Remove the cap and empty the tank
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE
PROCEDURES. IMPORTANT: DO NOT SUBMERGE THE PRODUCT IN WATER
Cleaning the outside surface of the appliance
Use a soft cloth to remove any dust from the product.
If this is not enough, use a soft cloth dampened with water and a mild detergent at a temperature not exceeding 50°C. Let
the appliance dry completely before using it.
Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.
chemical substances or other items that may damage the surface to clean it.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Cleaning the dust filter and the honeycomb panel
Clean the dust filter frequently, at least once a month.
Gently remove the anti-dust filter from the filter assembly and extract the honeycomb panel, as shown in the drawing below.
Honeycomb panel
Elimination of residual water from the integrated tank
To eliminate the residual water from the integrated tank, refer to the "Filling and emptying the water tank" section.
V 01/21

MAINTENANCE AND STORAGE

Filter assembly
Clean the dust filter with a soft brush or vacuum cleaner and wash it in water with
a neutral detergent.
Also remove the honeycomb filter.
Allow the filter to dry completely after washing; then reinstall the components.
Clean the water tank with a dry cloth
Do not use oils,
13