1. Clean the shelves and the inside with warm water and a mild detergent.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
4. Check the water drain and clean it if needed.
➢ Clean with warm water and a mild, non- acidic detergent. Do not restart the
appliance until the door seals have dried completely.
6.3 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent person
only. If the LED-illuminant is damaged, please contact a qualified
professional (not covered by the guarantee).
NOTICE! Any damage that is caused to your appliance by improper
replacement of the illuminant will not be fixed free of charge, even if the
guarantee period of the appliance is still valid.
7. Troubleshooting
WARNING! Before you start troubleshooting, disconnect the appliance
from the mains. Any work not described in this instruction manual must be
carried out by a qualified professional only.
I
NTERNAL CLEANING
D
OOR SEALS
~ 87 ~