Icy Box IB-382H-C31 Handbuch Seite 10

Starting up
Connect the power supply to the power supply connection (1.) of the
1.
IB-382H-C31.
2. Connect the power supply of the IB-382H-C31 with a standard
230 V EU socket.
3. Connect the USB Type-C
Type-A cable to the IB-382H-C31.
Hint:
Choose the cable according to the type of your USB 3.1 (Gen2) port
on the host computer.
- USB Type-C
host computer
- USB Type-C
computer
Attention!
The cable must be connected to the Type-C
enclosure marked "PC".
4. Connect the USB cable to your host computer.
5. Now set the ON/OFF switch (2.) to "ON".
The IB-382H-C31 including the installed HDD/SSD will now be
automatically recognized by the operating system.
Hint:
Drives must be initialized and have active partitions so that they are
immediately recognized as data carriers in the operating system. If
this is not the case, initialize the drives in the disk management of your
operating system.
The full USB 3.1 (Gen2) transfer rate can only be achieved with a
compatible USB 3.1 (Gen2) host computer. Furthermore, the USB 3.1
drivers must be installed by the operating system. If this is not the case,
install the appropriate drivers for your operating system (Windows
macOS ).
®
6. Now connect your USB devices to the 1x USB Type-C
Type-A connectors as required.
Manual IB-382H-C31
to USB Type-C
®
to USB Type-C
®
to USB Type-A cable for USB Type-A port on host
®
or the USB Type-C
®
cable for USB Type-C
®
connector (3.) of the
®
to USB
®
port on the
®
,
®
and 2x USB
®