Remote Access Via Web Client; Login To Web Client; Notice For Windows 8 And Windows10 Users - Eneo MNR-18N04000A Schnellinstallationsanleitung

VIDEO LOSS: The analog camera is disconnected.
No Camera: IP camera is disconnected.
Decoding Failed: The DVR doesn't support this kind of IP camera compression standard,
please change to H.264 compression standard.
Click to open Quick Add menu to add IP camera.
Click to edit current IP camera.

Remote Access via Web Client

Use the Web Client to remotely access your DVR at anytime via a PC. Before you access
the Web Client, you need to ensure that the network settings of the DVR are configured
properly. The most convenient and easiest way is if you have set the DVR a static IP ad-
dress . It means you only need to open the web browser on your PC and type in the static
IP address you have set on the DVR. However, if the IP address of the DVR is assigned by a
DHCP server , then it means that each time you reboot the DVR, the IP address changes.
In this case, ask if your ISP can provide you a static IP address. If not, then configure the
DDNS service. Also, please make sure the UPnP is configured in the DVR and router, or the
manual port forwarding is completed in the router.
You will need to install the plug-in if this is the first time you connect to your DVR via IE.

Login to Web Client

Notice for Windows 8 and Windows10 Users:

1. If you are running Windows 8 or Windows10,you will have to right click on Inter-
net Explorer from the start menu and select "Run as administrator".
2. After successful Login to the Web Viewer,the system will enter into live display
interface and connect to audio/video feed automatically.
16