DeWalt DW712 Anweisungen Seite 34

E N G L I S H
Transporting (fig. B2)
In order to conveniently carry the tool, a carrying strap can be attached to
the base. The carrying strap (see fig. A7) is available as an option.
• To transport the saw, lower the head and depress the lock down pin (14).
• Lock the rail lock knob with the saw head in the front position, lock the
mitre arm in the utter right mitre angle, slide the fence (3) completely
inward and lock the bevel lever (11) with the saw head in the vertical
position to make the tool as compact as possible.
• Always use the hand indentations (31) shown in fig. B2 to transport the saw.
Maintenance
Your D WALT Power Tool has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft
cloth.
• Regularly clean the table top.
• Regularly clean the dust collection system.
Avoid the use of cleaners or lubricants to maintain the tool.
In particular spray and aerosol cleaners may chemically attack
the plastic lower guard.
Cleaning and maintaining the kerf plate (fig. U)
Regularly clean the area below the kerf plate.
If the kerf plate is worn it must be replaced.
• Remove the screws (67) holding the kerf plate (32).
• Remove the kerf plate and clean the area below.
• Re-install the parts of the kerf plate and the screws.
• Tighten the screws hand-tight.
• To adjust the kerf plate, proceed as follows:
• Pull down the head until the blade just enters the saw kerf.
• Adjust each part of the kerf plate to fit closely to the teeth of the blade.
• Tighten the screws.
Unwanted tools and the environment
Take your tool to an authorized D
disposed of in an environmentally safe way.
34
WALT repair agent where it will be
E
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D WALT machine, simply return it within 30 days, complete as
E
purchased, to the point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
12 months following purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for Power Tools.
Excludes accessories.
• ONE YEAR WARRANTY •
If your D WALT product becomes defective due to faulty materials or
E
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
please use the appropriate telephone number on the back of this
manual. Alternatively, a list of authorized D
details on our after-sales service are available on the Internet at
www.2helpU.com.
WALT machine, in the
E
WALT repair agent,
E
WALT repair agents and full
E