Ec Declaration Of Conformity; General Power Tool Safety Warnings - DeWalt XR FLEX VOLT LI-ION DCS575 Originalanweisungen

Charger
Mains voltage V
AC
Battery type
Approx. charging time min 22 (1.3 Ah) 22 (1.5 Ah) 30 (2.0 Ah)
of battery packs
45 (3.0 Ah) 60 (4.0 Ah) 75 (5.0 Ah)
Weight kg
Fuses:
Europe 230V tools
U.K. & Ireland 230V tools
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
CORDLESS CIRCULAR SAW
DCS575, DCS576
D WALT declares that these products described
e
under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-5:2010.
These products also comply with Directive 2014/30/
EU and 2011/65/EU. For more information, please
contact D WALT at the following address or refer to
e
the back of the manual.
The undersigned is responsible for compilation of
DCB118
the technical file and makes this declaration on
230
behalf of D
18/54 Li-Ion
60 (6.0 Ah)
Markus Rompel
.66
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
10 Amperes. mains
21.06.2016
3 Amperes. in plugs

General Power Tool Safety Warnings

The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a)
b)
c)
2) ELECTRICAL SAFETY
a)
b)
c)
d)
WALT.
e
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING: Read all safety
warnings, instructions, illustrations
and specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
english
53