Putting Into Operation - JESS Welding G450 S Betriebsanleitung

5 Functional description for the G450 S and G600 S
5 Functional description for the G450 S and G600 S
Fig. 5 Functional description for the G450 S and G600 S
A C
"Hot start" rotary switch
B Internal/external rotary D
switch
H
G
F
E

6 Putting into operation

Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly
and repair work:
• Switch off the power source.
• Disconnect all electrical connections.
• Switch off the entire welding system.
Risk of injury
Increased noise pollution.
• Wear personal protective equipment: ear protectors.
EN - 10
Remote control socket
Welding cable connection bush (−)
DANGER
CAUTION
E
Welding cable connection bush (+)
F Digital welding current indicator
G450 S | G600 S
G Welding current knob
H Main switch
A
B
C
D
BA-0003 • 2020-04-09