Interacoustics Callisto Gebrauchsanweisung Seite 47

Advanced view
Callisto™ – Instructions for Use - EN
List of Protocols allows you to select a test protocol (def ault or user
def ined) to use in the current test session.
Temporary Setup button allows f or making temporary changes to the
selected test protocol. The changes will be valid f or the current session
only. Af ter making the changes and returning to the main screen, the
name of the test protocol will be f ollowed by an asterisk (*).
NOTE: Protocols from ANSI and IEC cannot be temporarily
modified.
List of historical sessions accesses historical sessions f or
comparison purposes.
Toggle between Lock and Unlock the Selected Session f reezes the
current or historical session on the screen f or comparison to other
sessions.
Go to Current Session button brings you back to current session.
Report Editor button opens a separate window f or adding notes to the
current session. Note that af ter saving the session no changes can
added to the report.
Single f requency button represents an optional manual
test that allows f or pre-setting hearing aid gain prior to
HIT.
Place the hearing aid in the ear test box and press the
single f requency button. A 1000 Hz tone will then
appear allowing you to see the exact input and output
of the hearing aid. Press the button again to end the
test.
Simple view/Advanced view buttons toggle between an advanced
screen view (including the test and f itting prescription inf ormation on
the right hand side) and a simpler view with a larger graph.
Normal and reversed coordinate system buttons enable you to
toggle between reversed and normal graph.
Simple view
Page 43