Connecting The Soundbar; Connecting Electrical Power; How To Mount The Ac/Dc Adapter - Samsung HW-LST70T Bedienungsanleitung

04 CONNECTING THE SOUNDBAR

Connecting Electrical Power

Connect the Soundbar to an electrical outlet in the
following order:
1. Connect the AC/DC adapter to the Soundbar.
2. Connect the power cord to a wall socket.
• For more information about the required
electrical power and power consumption,
refer to the label attached to the product.
(Label: Bottom of the Soundbar Main Unit)
CAUTION ! TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE AC/DC
ADAPTOR TO RAIN OR MOISTURE.
AC/DC Adapter
Rear of the Soundbar Main Unit
• While the cable is not in use, seal it with the
silicone.
NOTES
• If you unplug and reconnect the power
cord when the product is turned on, the
Soundbar turns on automatically.
• Never forcibly pull the power cord of AC/
DC adapter.
• When installing the AC/DC adapter
horizontally, place it with the Samsung
logo facing upward.
DIGITAL
AUDIO IN
(OPTICAL)
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
SERVICE
DC 23V
How to mount the AC/DC
adapter
• Tighten 2 or 4 screws (not supplied) on the
wall or table and then insert them into the
grooves on the rear of the AC/DC adapter.
You cannot install the adapter directly on
the floor.
• For the mounting screws, see the following
figures.
Recommended Screw specification
6.5 mm
ENG - 16
(not supplied)
L12
4.5 mm
M3