Service And Disposal; Technical Service And Spare Parts; Disposal Of The Machine; Disposal Of Harmful Substances - Sanremo YOU YO1A 0 0 C Serie Betriebsanleitung

Service and disposal

16 TECHNICAL SERVICE AND SPARE PARTS

For spare parts and all problems regarding the
machine, contact the authorised sales network only.
If repairs are required, use only original spare
parts to guarantee that the technical features of the
machine remain unchanged over time.
To order spare parts, follow the instructions in the
spare parts catalogue.

17 DISPOSAL OF THE MACHINE

To protect the environment, proceed in accordance
with the local regulations in force.
When the appliance can no longer be used or
repaired, the components must be separated for
disposal. Machines sent for disposal must be intact.
Electrical equipment cannot be disposed of as
urban waste, but must be sorted in compliance
with the special regulations on Waste Electrical and
Electronic Equipment (Italian Legislative Decree no.
49 of 14/03/2014, Decree 2012/19 EU, Decree
2003/108 EU, Italian Legislative Decree no. 151 of
25/07/2005, Italian Legislative Decree no. 152 of
03/04/2006).
Electrical equipment is marked with a crossed-out
wheeled bin symbol. This symbol indicates that the
equipment was placed on the market after 13 August
2005 and must be disposed of separately.
SERVICE AND
DISPOSAL
Considering the substances and materials contained
in the equipment, its inappropriate or illegal
disposal of, or its improper use, may cause damage
to persons and the environment. Electrical waste
disposal which does not comply with the regulations
in force is punishable by administrative and penal
sanctions.

11.8 DISPOSAL OF HARMFUL SUBSTANCES

To dispose of these substances, refer to the
regulations in force in the country of installation and
proceed accordingly.
91
IMPORTANT: for information on
the disposal of harmful substances
(lubricants, solvents, painted
products, etc.) please refer to the
following paragraph.
IMPORTANT: any irregularities
committed by the Customer
before, during or after scrapping
and disposal of the machine
components, and in interpreting
and applying the regulations in
force, is the sole responsibility of the
Customer.
YOU