Balluff BTL C15A 0- Serie Konfigurationsanleitung Seite 151

BTL _ _ _ _ _ _ - _ _ _ _ -C1...
Magnetostrictive linear position sensor
6
System Functions (continued)
6.6.3 Events
PD Update Timeout
With special process data values, the device automatically
checks whether the values are updated in the time period
specified by the device. If an update timeout is triggered as
a result, this is output via the following diagnosis
messages:
Event Event Event –
Code Type Description
– Remedy
0x1851 Notifica- Process Data
(6225) tion Update
Timeout – for
information
purposes
only
0x1852 Warning Multiple
(6226) Process Data
Update
Timeout – for
information
purposes
only
Tab. 6-18: Process data information and configuration – Events
PD Profile Selection after Change of Variant
If the variant of the device is changed, the currently set
profile is retained.
In the case that the corresponding PD profile is not valid
for this variant, the default profile for the corresponding
variant is selected.
Event Event Event –
Code Type Description
– Remedy
0x1850 Notifica- Process data
(6224) tion profile
selection
cannot be
used –
default value
is used.
Tab. 6-19: Process data information and configuration – Events
www.balluff.com
PD Invalid
PD Inputs Invalid:
Input data (device-to-master) is marked as invalid if the
device status (see section 6.1 on page 61) of the device
is Failure. In all other states, replacement values for the
data are output for which the content cannot be output
correctly.
Device Status
0 – Device is
operating properly.
0 – Device is
operating properly.
Device Status
0 – Device is
operating properly.
english 73