Balluff BTL C15A 0- Serie Konfigurationsanleitung Seite 103

BTL _ _ _ _ _ _ - _ _ _ _ -C1...
Magnetostrictive linear position sensor
3
Overview of IO-Link Data and Functions (continued)
Event Code Event Type
0x8D10 Warning
(36112)
0x8D12 Warning
(36114)
0x8D13 Warning
(36115)
0x8D20 Warning
(36128)
0x8D22 Warning
(36130)
0x8D23 Error
(36131)
0x8D24 Warning
(36132)
0x8D25 Error
(36133)
Tab. 3-19: Events – Overview
www.balluff.com
Event – Description – Remedy
Device Temperature Upper Warning – The set upper
temperature warning threshold has been exceeded.
The defined threshold of the device-internal humidity
was exceeded.
► Check installation and ambient conditions.
One or more extreme conditions present.
Device Temperature Lower Warning – The device
temperature has fallen below the set lower
temperature warning threshold.
Warning limit for write cycles reached – maintenance
monitoring no longer guaranteed – for information
purposes only.
Write cycle limit reached – saving no longer ensured
– replacement recommended.
Parameter write error – for information purposes
only.
Parameters not consistent – basic settings are used,
service required. Parameterization processes and
resets can no longer be performed.
Device Status
0 – Device is operating properly.
1 – Maintenance-Required
0 – Device is operating properly.
0 – Device is operating properly.
0 – Device is operating properly.
1 – Maintenance-Required
0 – Device is operating properly.
4 – Failure
english 25