Reset To Factory Default Settings - OHAUS Guardian 3000 Handbuch

TM
Guardian Hotplate-Stirrers
4.7.

Reset to Factory Default Settings

Resetting the unit to Factory Default Settings will do the following:
•
Clear all Single Point Calibration (SPC) temperatures.
•
Turn off Power Recovery.
•
Re-enable the beeper setting.
1. To reset the unit to factory default settings, the unit must first be in the top
level of the settings menu. Please refer to Accessing / Exiting Section for
how to enter the top level menu.
Rotate the left knob to scroll to the SYS (System) setting.
2.
3. Briefly press the left knob to enter the System settings menu.

Rotate the left knob to rSEt (Reset).
4.
5. Briefly press the left knob to enter the menu.

Rotate the left knob to scroll to the desired setting. Yes for resetting and NO for
6.
not resetting.
EN-29